Morning all, I have an MPPT charge controller rated for 40A, and can take an input of 12 or 24v, and output 12 or 24v.

I'm currently in the market for a new MPPT charge controller. Since one of my favorite hobbies is ham radio, I am searching for a controller that does not produce a bunch of radio frequency …

I'm curious if I can use both a pwm and a mppt controller on a single battery bank at the same time.

Is there a rule for mixing different size panels to connect to an mppt charge controller? I have a set of 24V panels. (6) are 320 watt and (2) is 370watt.

Will an MPPT charge controller supply power to the battery based inverter when the batteries are fully charge and there is plenty sun.

Trying to understand how to best/properly determine the correct cable/wire size to use between two 440 Watt Solar Panels and an MPPT Charge Controller. The distance between the panels …

I have installed two 5kva MPPT inverters, each with separate battery bank and separate front end load of appliances. The only thing shared between both is PV input which is a 96 volt 6000 …

In bulk mode the controller is in MPPT mode. In absorb and float it is not in MPPT mode. If it is not in MPPT mode, does that mean it is n PWM mode? It is still p ower p oint t racking, it just isn't …

If you have a 4 - 325 = 1300 watt array on a MPPT type charge controller, you should expect it to produce about 75% of it's panel rating (NOCT value) 1300 watt array should produce about …

Typical recommended MPPT nominal voltage input for a given system is double the battery bank voltage.