For the purpose of this installation, we will be installing the ladder bars on a stock chassis using the existing factory rear end without removing it from the car.

Jan 1, 1995 · For installation of S&W Performance Group's direct fit ladder bar, low-rider ladder bar and 4-link frame rails. Please read complete instructions thoroughly before beginning!

These plans show you how to make and install ladder bars and Ladder link bars (AKA double adjustable ladder bars). Setup is easy and as I mentioned in the first sentence, They work!

Install the ladder bar assemblies into the chassis and axle brackets using the supplied 3/4" hardware. Mount the front rod ends in the middle holes on the chassis brackets.

Prior to beginning installation use the following parts lists to verify that you have received all components required for installation. NOTE: Eyebolts must be inspected frequently. Following initial installation …

We recommend welding 1” at a time, switching back and forth between brackets to prevent distortion. Once welding is finished and cooling is complete. Install your ladder bar assemblies; once those are …

Align front traction bar holes with frame bracket holes and insert 1⁄2” bolt with self locking nut supplied. This bolt and nut should be tightened to pull the side plates in to crush the rubber bushings slightly.

Read all instructions completely before beginning the installation. The following suggestions will help to ensure a quality installation.

Install your ladder bar assemblies; once those are installed you are ready to set up your ladder bar. NOTE: Always use anti-seize compound on all threads when assembling the ladder bars.

For the purpose of this installation, we will be installing the ladder bars on a rear end housing that has been or will be removed from the car and is either being replaced or modified for this application.